DIGITUS Server Rack Unique Series - 600x1000 mm (WxD)

Broj artikla: DN-19 SRV-26U-B-G-1

EAN: 4016032332497

26U server rack, Unique, 1340x600x1000 mm steel front door w. plexi glass, black (RAL 9005)

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany

Special roof construction for fan unit, incl. perforated cover
Lock system with pivot lever on front- and rear door (incl. profile half cylinder lock)
Sliding cable entry with rubber sealing on the top and base

More product information

Opis

The server cabinets from the Unique series were developed for especially convenient and flexible network cabling. Inlets to the side in the roof and floor equipped with brushes (starting with a cabinet width of 800 mm), a sliding inlet with foam rubber seal as well as an additional rear brush inlet in the floor structure, enable versatile use in a wide range of application scenarios. Single perforated front doors and double perforated back doors, including swing handle with profile half-cylinder, ensure improved air circulation. The roof is equipped with a perforated cover for improved air circulation. This features a special design for easy mounting of a fan module. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Side walls and doors that can be locked or removed in a modular design (horizontally separated starting from 42 rack units) improve accessibility. The door hinges can be switched. Furthermore, the cabinets can be completely dismantled if necessary due to their collapsible design.

Tehnički detalji

Safety class rating IP20
Single wing opening front door with perforated steel frame with plexi glass
Double wing opening steel rear door with 70% perforation
Front door is curved to the outside in perforated resp. plexi glass area
Lock system with pivot lever on front- and rear door (incl. profile half cylinder lock)
230° door opening angle on front- and rear doors
Front door with 4-point locking and rear door with 3-point locking
Side panels are lockable and removable
incl. 4 pieces of leveling feet and 4 pieces of castor, already pre-configured under the cabinet (front castor are lockable)
483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
483 mm (19“) profile rails are adjustable in depth and with height unit marking
Built-in depth support bars for more stability
Sliding cable entry with rubber sealing on the top and base
Top and base with brushed cable entries left and right
Special roof construction for fan unit, incl. perforated cover
Several earthing points for rack components
Incl. installation set (screws, cage nuts, washers)
Rack is completely mounted
Equipment mounting depth min.-max.: 675-875 mm

Attributes

Bočne ploče: Obje strane
Boja: crna, RAL 9005
Dubina: 1000 mm
Jedinice: 26
Kapacitet opterećenja: 1000 kg
Prednja vrata: Staklena vrata, jednostruko otvaranje
Širina: 600 mm
Stražnja vrata: Čelična vrata, perforirana, dvostruko otvaranje
Vrsta ormara: Ormar za mrežnog poslužitelja
IP klasa zaštite: IP20
Montirano: Da

Sadržaj paketa

Earthing wire set
Installation set (screws, cage nuts, washers)
Installation Kit for Profile Half Cylinder
2 x Keys

Downloads and Certificates

Tehnička dokumentacija

Priručnik

Vodič za brzi početak

QIG Fan units EN DE

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	1	71,00	105,00	65,00	134,00	914.550,00
Jedinica pakiranja (unutarnja)	1	71,00	105,00	65,00	134,00	914.550,00
Jedinica pakiranja (pojedinačna)	1	71,00	105,00	65,00	134,00	914.550,00

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be laid neatly and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.