DIGITUS Komunikacijski ormar Dynamic Basic - 800x800 mm (ŠxD)

Broj artikla: DN-19 42U-8/8-D

EAN: 4016032336525

ORMAR 42U 80/80 -D RAL7035

The DIGITUS® Dynamic Basic series has been manufactured, designed and developed to meet the high demands of IT infrastructure

Installation of roof ventilators prepared
Lockable swivel lever handle on the front door
Base with punched cable inlet, covered with screwed plate

More product information

Product comparison table ›

‹

›

Opis

Dynamic Basic komunikacijski ormari dizajnirani su i proizvedeni za ugradnju i ožičenje aktivne i pasivne mrežne opreme. S nekoliko optimizacija možete osigurati savršen odnos kvalitete i dodane vrijednosti. Svaki ormar ima čvrstu konstrukciju, jednostavan je za uporabu i estetski prihvatljiv svakom prostoru. Prednja vrata izrađena su od bočnih metalnih profila sa sigurnosnim staklom. Svi bočni paneli kao i stražnji panel mogu se zaključati i ukloniti po potrebi. Svaki ormar je opremljen s galvaniziranim 483 mm (19”) šinama koje su montirane s lijeve i desne strane, s prednje i sa stražnje strane ormara. Mogu se prilagoditi po dubini i na njima se nalaze oznake visine po broju unita. Krov je pripremljen za ugradnju ventilatorskih jedinica. Svi Dynamic Basic komunikacijski ormari isporučeni su kompletno sastavljeni. Dostupni su u različitim visinama od 22U do 47U i širine od 600 ili 800 mm, dubine od 600 do 800 mm. Dolaze u standardnim bojama, sivoj (RAL 7035) i crnoj (RAL 9005). Ostale boje dostupne su na zahtjev.

Tehnički detalji

Protection class IP20
Front door made of metal side struts with safety glass
Locking system with swivel lever handle on front door
120° door opening angle
1-point locking on the front door
Rear and side panels are lockable and removable
Incl. 4 levelling feet, enclosed
483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized
483 mm (19") profile rails are adjustable in depth and marked with the height unit
Base with punched cable inlet, covered with screwed plate
Die-cut cable inlet with plastic cover in the base on the left and right
Die-cut cable inlets with plastic cover in the roof
Roof is prepared to accommodate a fan element (punched-out mounts)
Various earthing points in the enclosure for built-in components
Incl. installation set (screws, cage nuts, washers)
Installation depth for components min. - max.: 430-750 mm
Supplied fully assembled
Bočne ploče: Obje strane
Boja: svijetlo siva, RAL 7035
Dubina: 800 mm
Jedinice: 42
Kapacitet opterećenja: 600 kg
Prednja vrata: Staklena vrata, jednostruko otvaranje
Širina: 800 mm
Stražnja vrata: Stražnja ploča s bravom, odvojiva
Vrsta ormara: Mrežni ormar
IP klasa zaštite: IP20
Montirano: Da

Sadržaj paketa

Earthing cable set
Installation set (screws, cage nuts, washers)
2 x key

Downloads and Certificates

Tehnička dokumentacija

Priručnik

Vodič za brzi početak

QIG Fan units EN DE

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	1	112,50	88,00	88,00	220,00	1.703.680,00
Jedinica pakiranja (unutarnja)	1	112,50	88,00	88,00	220,00	1.703.680,00
Jedinica pakiranja (pojedinačna)	1	112,50	88,00	88,00	220,00	1.703.680,00

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be neatly routed and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.