DIGITUS Industrial network cabinet, indoor use, IP55

Broj artikla: DN-19 42U-I-8/10-1

EAN: 4016032371052

42U network rack indoor IP55 2100x800x1000, incl. plinth, grey (RAL 7035)

Protection class IP55 against water and dust ingress in accordance with IEC EN60529
IK10 impact resistance tested in accordance with IEC EN62262
4-point locking of the front and rear door
incl. mounted base

More product information

Opis

The free-standing industrial network enclosures are specially adapted to the requirements of harsh environments in accordance with protection class IP55. The base chassis can be opened modularly thanks to its galvanized, screw-fastened panels. It is also equipped with a slide-on cable inlet with a foam rubber seal and PG cable glands. A plinth (100 mm) mounted under the enclosure provides more storage space for excess cable lengths. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 2.0 mm thick. All-round profile perforation supports a wide range of installation options in the cabinet. The coloring takes the form of electrostatic powder coating in the standard color grey (RAL 7035). The adhesion according to EN ISO 2409: Class 0 to 1 and the 500-hour salt spray resistance test confirm a possible operating temperature of -25 °C to + 70 °C. The removable side panels, fastened with countersunk screws, and doors including swivel handle with profile half cylinder, improve the safety of accessibility.

Tehnički detalji

Front door made entirely of metal frame and 4 mm thick tempered glass
Closed steel rear door with filtered air inlet (250x250 mm)
Door structure made of multi-bent material ensures rigidity and strength
Special sealing system between metal and profile system made of PUR (polyurethane)
Side panels with special fastening via countersunk screw
130° door opening angle
1.5 - 2.0 mm thick sheet steel
Corner connectors made of E-160 material processed with aluminum spray technology, highly resistant to rusting
Circumferential profile perforation structure on the inside
483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized
483 mm (19") profile rails are adjustable in depth and marked with the height unit
Floor chassis equipped with slide-on cable inlet & PG cable inlets (1x PG 48, 4x PG 21)
Frame profiles manufactured with DIN EN10142-2000 DX51 D+Z material, which offers high resistance to rust
Roof with screwed privacy screen in front of eyebolts
Installation depth for components min.-max.: 160-860 mm
Height including base, transport eyelets, mudguard: 2159 mm
Boja: svijetlo siva, RAL 7035
Dubina: 1000 mm
Jedinice: 42
Kapacitet opterećenja: 1500 kg
Prednja vrata: Staklena vrata, jednostruko otvaranje
Širina: 800 mm
Vrsta ormara: Industrijski ormar
IP klasa zaštite: IP55
Montirano: Da

Sadržaj paketa

Earthing cable set
Installation set (screws, cage nuts, washers)
2x key

Downloads and Certificates

Tehnička dokumentacija

Datasheet HR

Priručnik

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	1	176,00	105,00	85,00	215,00	1.918.875,00
Jedinica pakiranja (unutarnja)	1	176,00	105,00	85,00	215,00	1.918.875,00
Jedinica pakiranja (pojedinačna)	1	176,00	105,00	85,00	215,00	1.918.875,00

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be neatly routed and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.