DIGITUS CAT 6A S/FTP patch cord

Broj artikla: DK-1644-A-015

EAN: 4016032423959

CAT 6A S-FTP patch cable, Cu, LSZH AWG 26/7, length 1.5 m, color grey

Future-oriented standards and high-end quality for your network.

With LSZH (Low Smoke Zero Halogen) sheath for best fire behaviour and low smoke emissions.
Transparent yellow colored plug with metal shielding for easy identification of Category 6A (500 MHz)
Conductor: Copper (Cu)
PoE+ ready

More product information

Opis

The DIGITUS® Category 6A Class EA patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 A specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6A, because of the transparent yellow colored connector.

Tehnički detalji

2x RJ45 (8P8C) connectors
Boots with kink protection, strain relief and latch protection
Length marking on boot
Conductor: Copper (Cu)
Konfiguracija: 1:1
Kategorija: CAT 6A
Oklop: S-FTP, oklop parova u metalnoj foliji i pletenica
Duljina: 1.5 m
Boja: sivi
Kapica: LSOH
Struktura: 4 x 2 AWG 26/7, upletena parica
Tanka verzija: Ne
Flat Version: Ne

Downloads and Certificates

Tehnička dokumentacija

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	150	9,90	38,00	29,00	32,00	35.264,00
Jedinica pakiranja (unutarnja)	20	1,32	6,00	20,00	36,00	4.320,00
Jedinica pakiranja (pojedinačna)	1	0,07	1,00	14,00	14,00	196,00

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Make sure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.