Opis Tehnički detalji Attributes Sadržaj paketa Preuzimanje Logistika Safety notes Povezani proizvodi

DIGITUS Gigabit PoE media converter, RJ45 / SC, MM, PSE

Broj artikla: DN-82150

EAN: 4016032390022

DIGITUS PoE Media Converter, Multimode 10/100/1000Base-T to 1000Base-SX, Incl. PSU

The perfect converter solution for optical data transmission

PoE power supplier, PSE
Sends data with high quality and additionally offers the highest level of failure safety
A fast transfer in the gigabit range is guaranteed
Range of up to 0.5km

More product information

Opis

The media converters from DIGITUS® are an optimal solution for the migration of copper and fiber optic signals. From now on, you can access the fiber optic technology and transmit fiber optic signals over several kilometers without having to replace your entire network cabling. With our comprehensive range of products, you can respond to your individual needs. The intuitive operation guarantees a quick and easy installation. Many years of experience and a diverse range of services make DIGITUS® a reliable partner for your network technology.

Tehnički detalji

PoE power supplier, PSE
Compatible with the IEEE802.3af and IEEE802.3at standards
PoE power supply via PIN 4/5 (V-) and PIN 7/8 (V+)
Maximum total output of 30 watts
Compatible with IEEE802.3, IEEE802.3u and IEEE802.3z standards
Automatic cable recognition - Auto MDI/MDI-X function
Auto recognition of full and half duplex
Converts wire-based network signals into fiber optic signals
10/100/1000Base-TX to 1000Base-SX
Ports: 1x RJ45, 1x SC duplex
Range of up to 0.5km
Wavelength: 850nm
Multimode dual fiber
Diagnostic LEDs for status and activity monitoring
Power supply: 48~52V DC
Operating temperature: -20°C - 65°C
Storage temperature: -40°C - 85°C
Dimensions (mm): 95(L) x 71(W) x 26(H)
MTBF: 500,000 hours

Attributes

Konektor 1: RJ45
Konektor 2: SC
Mod: Višemodni
Udaljenost (km): 0,5
Industrijska uporaba: Ne
Način emitiranja: Jednosmjerno
PoE injektor: Da
Ethernet brzina: Gigabit

Sadržaj paketa

Gigabit PoE media converter, RJ45 / SC, MM, PSE
Quick start guide
Power adapter

Downloads and Certificates

Certifikati

ext. Link

Tehnička dokumentacija

Datasheet HR

Priručnik

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	10	8,00	57,00	41,00	28,00	65.436,00
Jedinica pakiranja (unutarnja)	1	0,80	24,00	13,00	6,00	1.872,00
Jedinica pakiranja (pojedinačna)	1	0,80	24,00	13,00	6,00	1.872,00

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.