Opis Tehnički detalji Sadržaj paketa Preuzimanje Logistika Safety notes Povezani proizvodi

DIGITUS 14 Slot Media Converter Chassis

Broj artikla: DN-82000

EAN: 4016032307211

ŠASIJA ZA MEDIA KONVERTER for DN-82x1x, DN-82x2x and DN-82x3x Series

The perfect solution for various media converters

More product information

Opis

The DIGITUS Media Converter Chassis let's you host up to 14 Media Converters in your Network or Server Cabinet. The great choice of Media Converters ensures highest flexibility. Every single module can be hot-swapped during the operation. The redundant Power Supply offers a smooth working and prevents any downtime of your network connection.

Tehnički detalji

Suitable for the Media Converter Series DN-82x1x, DN-82x2x and DN-82x3x
Equipped with a second, redundant Power Supply for maximum stability and reliability
Hot Swap Support for the Converters to ensure a flexible connection
For up to 14 Media Converters
Circuit Breaker for Overvoltage, Overflow and Short-Circuit
2 Height Units for 483mm (19")Rack Installation
Dimensions (L x W x H): 231mm x 485mm x 90mm
Operating temperature: 0 to 50 °C
Storage temperature: -20°C ... +85°C

Sadržaj paketa

Media Converter Chassis
Quick installation guide
2x Power Cords

Downloads and Certificates

Certifikati

ext. Link

Tehnička dokumentacija

Datasheet HR

Priručnik

Logistika

	Broj (komad)	Težina (kg)	Dubina (cm)	Širina (cm)	Visina (cm)	cm³
Jedinica pakiranja (vanjska)	1	6,90	56,00	40,00	22,00	49.280,00
Jedinica pakiranja (unutarnja)	1	6,90	56,00	40,00	22,00	49.280,00
Jedinica pakiranja (pojedinačna)	1	6,90	56,00	40,00	22,00	49.280,00

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.