10Gb/s SFP+SR MM 850nm 300m DDM Industrial

DIGITUS 10Gb/s SFP+SR MM 850nm 300m DDM Industrial

Broj artikla: DN-81212
EAN: 4016032476948

10G SFP+SR 850nm 300m LC DDM Industrial 300m LC DDM Industrial

10Gb/s SFP+SR MM Module 850nm 300m DDM Industrial grade

  • SFP+ package with LC connector
  • 850nm VCSEL Laser and PIN photo detector
  • Up to 300m transmission on 2000MHz-km MMF
  • Up to 11.3Gbps Data Links
  • Power dissipation < 1W
  • LVPECL compatible data input/output interface
  • Low EMI and excellent ESD protection
  • laser safety standard IEC-60825 compliant
  • Compatible with SFF8472
  • Operating temperature: -40 ~ 85 ° C

More product information

Opis

The 10Gb/s industrial SFP+ module allows network connectivity in industrial environments. The range of up to 300m and the wide temperature range of -40 °C up to 85°C with a power consumption of < 1W make the DN-81212 SFP+ a reliable transceiver in harsh environments.

Tehnički detalji

  • SFP+ package with LC connector
  • 850nm VCSEL Laser and PIN photo detector
  • Up to 300m transmission on 2000MHz-km MMF
  • Up to 11.3Gbps Data Links
  • Power dissipation < 1W
  • LVPECL compatible data input/output interface
  • Low EMI and excellent ESD protection
  • laser safety standard IEC-60825 compliant
  • Compatible with SFF8472
  • Operating temperature: -40 ~ 85 ° C
  • Compatible with the following manufacturers: Allied Telesis, Allnet, Avaya, CISCO, D-Link, Edimax, FINISAR, FORCE 10, Gigamon Intellinet, KTI Networks, Level One, PLANET, Tenda, TP-Link, TRENDnet,  Mikrotik , ENTERASYS, RIVERSTONE ,  Unifi, Ubiquiti, ZyXE
  • DDM podrška: Ne

Downloads and Certificates

Certifikati

Tehnička dokumentacija

Logistika

  Broj
(komad) 		Težina
(kg) 		Dubina
(cm) 		Širina
(cm) 		Visina
(cm) 		cm³
Jedinica pakiranja (vanjska) 240 10,00 40,00 56,00 26,00 58.240,00
Jedinica pakiranja (unutarnja) 1 0,04 0,00 0,00 0,00 0
Jedinica pakiranja (pojedinačna) 1 0,04 9,30 11,70 3,20 348,19

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage
  • eyes. Take care never to look directly into the light of an optical fiber, even if the light source is invisible to the naked eye.
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com