DIGITUS Wall-mounted enclosure Dynamic Basic series - 600x450 mm (WxD)

Product number: DN-19 09-U-EC

EAN: 4016032221708

9U wall mounting cabinet, Dynamic 478x600x450 mm, color grey (RAL 7035)

Ready for immediate use: Delivery is assembled
Quick and easy wall installation thanks to the enclosed mounting plate
Flexible cable routing options thanks to pre-punched openings in the roof, base and rear wall
Lockable safety glass door with 235° door opening angle
Depth-adjustable 483 mm (19") profile rails
Load capacity for the installation of components: 60 kg

More product information

Description

The Dynamic series wall-mounted network cabinets have been developed for simple and particularly cost-optimized network expansion. The roof, base and rear panel of each cabinet are equipped with a pre-punched cable inlet. The roof chassis is also provided with a punched-out area to accommodate a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.5 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Removable side panels and the lockable and removable front door improve accessibility. The door hinges can be changed. Wall mounting is carried out in two simple steps: The supplied mounting plate is screwed to the wall and then connected to the housing.

Technical details

Protection class IP20
Lockable safety glass door with steel frame
235° door opening angle
1-point locking on the front door
483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized
483 mm (19") profile rails are adjustable in depth and marked with the height unit
0.8 - 1.2 mm robust sheet steel with high load-bearing capacity, powder-coated
Cable entry possible at the rear, roof and base (pre-punched cut-outs)
Roof is prepared to accommodate a fan element (punched-out mounts)
Ventilation slots for active and passive ventilation
4 earthing points (base, side panel and front door) with protective cap
Installation depth for components min. - max.: 335 - 380 mm
Cabinet type: Wall mounting cabinet
Color: light grey, RAL 7035
Depth: 450 mm
Front door: Glass door, single opening
Load capacity: 60 kg
Side panels: Both sides
Units: 9
Width: 600 mm
IP protection class: IP20
Mounted: yes

Package content

Earthing cable set
Installation set (screws, cage nuts, washers)
2 x key

Downloads and Certificates

Certificate

ext. Link

Datasheet

QIG

Wall Mounting

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	1	21,00	52,00	48,00	62,00	154.752,00
Packaging Unit Inside	1	21,00	52,00	48,00	62,00	154.752,00
Packaging Unit Single	1	21,00	52,00	48,00	62,00	154.752,00

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be laid neatly and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.