DIGITUS Wall Mounting Cabinets Dynamic Basic Series - 600x450 mm (WxD)

Product number: DN-19 07-U-EC

EAN: 4016032221692

7U wall mounting cabinet, Dynamic 389x600x450 mm, color grey (RAL 7035)

450 mm depth provides a space saving installation
Optimized air ventilation and exhaustion
Lockable safety-glass door with steel frame

More product information

Description

The network cabinets for wall installation from the Dynamic series were developed for easy and especially cost-optimized network expansion. The roof, floor and back wall of each cabinet are equipped with a pre-cut cable inlet. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The mounting plate provided is bolted on the wall and then connected with the housing.

Technical details

Safety class rating IP20
Lockable safety-glass door with steel frame
235° door opening angle
1-point-locking-mechanism on the front door
483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
483 mm (19“) profile rails are adjustable in depth and with height unit marking
0.8 - 1.2 mm strong sheet steel with high load capacity, powder coated
Cable entry on the rear side, roof and base (pre-punched break-outs)
Roof is prepared for fan units (punched out entries)
Ventilation slots for active and passive ventilation and exhausting
4 earthing points (base, side panel and front door) with protection cap
Equipment mounting depth min.-max.: 335 -380 mm
Cabinet type: Wall mounting cabinet
Color: light grey, RAL 7035
Depth: 450 mm
Front door: Glass door, single opening
Load capacity: 60 kg
Side panels: Both sides
Units: 7
Width: 600 mm
IP protection class: IP20
Mounted: yes

Package content

Earthing wire set
Installation set (screws, cage nuts, washers)
2 x Keys

Downloads and Certificates

Certificate

ext. Link

Datasheet

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	1	15,40	43,00	48,00	62,00	127.968,00
Packaging Unit Inside	1	15,40	43,00	48,00	62,00	127.968,00
Packaging Unit Single	1	15,40	43,00	48,00	62,00	127.968,00

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be laid neatly and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.