DIGITUS Wall-mounted enclosure - SOHO, Slim

Product number: DN-19 04U-PB

EAN: 4016032200109

Wall mounting cabinet, SOHO, slim, 145x525x475 mm 3U rotatable, 2U fix, color grey (RAL 7035)

DIGITUS® wall-mounted enclosures are manufactured, designed and developed to meet the high demands of IT infrastructure.

Slim housing for installations where space is limited
Door stopper mechanism enables installation in any direction on the wall, ceiling or raised floor
3U rotatable profile rail at the front, 2U fixed profile rail at the rear
Pre-punched cut-outs for cable routing and fastening cable ties
Punched-out mounting holes throughout the lower housing area for fixing a wide variety of components
Load capacity for the installation of components: 30 kg

More product information

Description

The SOHO, Slim wall-mounted enclosures are ideal for housing active and passive components. They are characterized by simple and time-saving installation. The modern design fits into any office or home. The enclosure has 2 separate installation options: A rotatable vertical 3U rail is attached to the front. Alternatively, this can also be positioned horizontally or at an angle. A horizontal 2U rail is attached to the rear (fixed), which can be used for passive network components, for example. The punched-out mounting holes in the entire lower housing area also allow components that are not 483 mm (19") compatible to be installed (e.g. DSL routers, etc.). Alternatively, a mounting plate can be fitted, which is available as an option.

Technical details

Protection class IP20
Lockable housing with transparent polycarbonate pane
Upper part of the housing can be opened up to 80
Steel door stop mechanism keeps the door open
1-point four-point locking
2 separate 483 mm (19") installation options: 3U vertical (rotatable), 2U horizontal (fixed)
Max. installation depth (from front vertical rail to stop on rear horizontal rail): approx. 265 mm
2.0 mm thick sheet steel with a high load-bearing capacity, powder-coated
Pre-punched cut-outs for cable routing
Ventilation slots for active and passive ventilation
Area for cable ties
Lower housing area with punched-out mounting holes for mounting equipment that is not 483 mm (19") compatible
Mounting plate is optionally available
Fan mount dimensions: 57.5 x 57.5 mm
Hole spacing for fan mounting: 50 x 50 mm (3.5 mm diameter)
Cabinet type: Wall mounting cabinet, home automation
Color: light grey, RAL 7035
Depth: 475 mm
Front door: Glass door, single opening
Load capacity: 30 kg
Side panels: Both sides
Units: 5
Width: 525 mm
IP protection class: IP20
Mounted: yes

Package content

Earthing cable set
2 x key

Downloads and Certificates

Datasheet

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	1	9,50	50,00	53,00	16,00	42.400,00
Packaging Unit Inside	1	9,50	50,00	53,00	16,00	42.400,00
Packaging Unit Single	1	9,50	50,00	53,00	16,00	42.400,00

Safety notes

Ensure adequate ventilation to prevent the installed devices from overheating.
Network cabinets should not be overfilled and the ventilation openings must not be blocked.
Cables should be laid neatly and organized in cable ducts or trays.
Use surge protection devices to protect sensitive devices from power surges or lightning strikes.
Avoid moisture or wetness while observing the respective IP protection class.
Ensure that the cabinet and the devices used are properly earthed.
In regions with frequent thunderstorm activity, professional lightning protection should be integrated into the power supply.
To avoid uneven loading, always mount the heaviest units at the bottom of the cabinet.
Disconnect the installed devices from the power supply during maintenance or installation work.