DIGITUS Fiber optic splice closure, 48 cores, dome-shaped

Product number: DN-941091

EAN: 4016032486794

Mechanical fiber optic dome closure for max. 48 fibers

The robust design makes the closure resistant to harsh environments and intense climate changes. The flexible arrangement of the splice cassettes allows individual operation of each optical cable and fiber strand.

The closure casing is made of quality engineering plastics
Anti-erosion against acid and alkali salt
Anti-aging and reliable mechanical structure
IP68 protection
The closure is of small volume and big capacity
It allows convenient maintenance and can be opened repeatedly

More product information

Description

The optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. They are applicable for overhead, man-well of pipeline, embedded situation etc. The closures are more secure due to presence of seal for higher protection. The inclusion of sealing ring and air valve makes it more suitable for relevant application areas. They are applicable to ribbon type optical cable and common optical cable. Splice trays inside the closure rotate like booklets and have sufficient space for winding the optical fibers.

Technical details

When the sleeve is mounted on a pole made of metal, there is a direct conductive connection
It can bear the tensile force of at least 1000N
Max Capacity: 48 Cores
Number of Cable Entrance/Exit : 1:3 or 2:2
Diameter of Cable : 4 small round ports (16mm)
Temperature : -40℃~+60℃
Humidity : ≤95% (at 40℃)
Air Pressure : 70kPa ~106kPa
Lifetime : 25 years
Dimensions (D x H): 300 x190 mm

Package content

1x Digitus fiber optic splice closure, 48 cores, dome-shaped
1x Tag paper
1x Sand paper / 1 x Silver paper
1x Sealing rubber strip
1x Insulating tape
1x Cleaning tissue
4x Plastic plug
1x Fiber protective tube
1x Heat-Shrink sleeve
3x Cable tie

Downloads and Certificates

Datasheet

Datasheet EN

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	8	15,60	41,00	64,00	40,00	104.960,00
Packaging Unit Inside	1	1,95	0,00	0,00	0,00	0
Packaging Unit Single	1	1,95	19,50	31,00	19,00	11.485,50

Safety notes

Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
To protect cables from physical damage, they should be laid in special ducts or with protective materials
Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.