DIGITUS CAT 6 U/UTP patch cord - LSZH

Product number: DK-1617-0025/B

EAN: 4016032387541

CAT 6 U-UTP patch cord, Cu, LSZH AWG 26/7, length 0.25 m, color blue

Future-oriented standards and high-end quality for your network.

With LSZH (Low Smoke Zero Halogen) sheath for best fire behaviour and low smoke emissions.
Transparent red colored plug for easy identification of Category 6 (250 MHz)
Conductor: Copper (Cu)
PoE+ ready

More product information

Description

The DIGITUS® Category 6 Class E patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The performance is tested up to 250 MHz inclusive performance characteristics such as near end cross talk (“NEXT”). DIGITUS® patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6, because of the transparent red colored connector.

Technical details

2x RJ45 (8P8C) connectors
Boots with kink protection, strain relief and latch protection
Length marking on boot
Conductor: Copper (Cu)
Assortment: Twisted Pair Patch Cables
Configuration: 1:1
Connector 1: Modular RJ45 (8/8) plug
Connector 2: Modular RJ45 (8/8) plug
Packaging: DIGITUS Polybag
Category: CAT 6
Shielding: U-UTP, unshielded
Length: 0.25 m
Color: blue
Jacket: LSOH
Slim Version: no
Structure: 4 x 2 AWG 26/7, twisted pair
Flat Version: no

Downloads and Certificates

Datasheet

Certificate

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	300	5,50	36,00	30,00	23,00	24.840,00
Packaging Unit Inside	10	0,18	18,00	14,00	4,00	1.008,00
Packaging Unit Single	1	0,02	13,00	11,00	1,00	143,00

Safety notes

When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
Ensure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
Ensure that cables are not laid in areas where they can be easily damaged mechanically.
Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.